EKOVAR Policies

The sustainable use of energy and natural resources can be achieved through sensible and comprehensive waste management.

At EKOVAR, our experience and international expertise, combined with our staff—each of whom is trained and specialized in their respective fields—enable us to offer long-term solutions to waste generators in accordance with the comprehensive licenses we have obtained from the Ministry of Environment and Urbanization. By evaluating all aspects of waste management as a whole, we serve all of Turkey through activities that are sustainable from both environmental and economic perspectives.

As EKOVAR, we are committed to:

• ​Ensure safe and healthy working conditions in all our activities by taking OSH risks and opportunities into account,

• ​Set OSH management system objectives, measure performance, and take steps to improve performance,

• ​Comply with all legal and other requirements related to Occupational Safety and Health in all our activities,

• ​Comply with current OSH legislation and the requirements of the organizations of which we are members,

• ​Provide training and raise awareness to ensure the health and safety of all our employees,

• ​Ensure that all our employees, suppliers, contractors, and visitors comply with established OSH rules,

• ​Identify and eliminate hazards in our facilities that could lead to workplace accidents or occupational diseases, and to reduce OSH risks,

• ​Keep abreast of technological advancements in Occupational Safety and Health and direct our investments accordingly,

• ​Ensure the participation of our employees and employee representatives in all our processes,

• ​Continuously improving our Occupational Safety and Health Management System.

EKOVAR provides access to all necessary resources to deliver high-quality “Waste Management Services” and ensure the continuity and reliability of these services.

EKOVAR prioritizes legal requirements and compliance obligations as the foundation for achieving its goals. Continuously developing employees’ knowledge and skills, and having them participate in initiatives that empower individuals while fostering team spirit and a sense of commitment to a shared mission, are key components of EKOVAR’s development policy.

To this purpose, EKOVAR:

  • Publishes clear and transparent procedures
  • Shares authority and responsibilities
  • Prioritizes change management and communicates changes in a timely manner
  • Organizes training programs for staff development
  • Conducts routine training for new hires to ensure they meet the required standards
  • Participate in trade fairs, conferences, seminars, and workshops.

At Ekovar A.Ş., we operate on the principle of contributing to economic, environmental, and social sustainability. Our goal is to ensure that fundamental human rights are upheld in all our business processes. We aim to provide a work environment that complies with international standards and respects human rights—one where employees can develop themselves, freely express their ideas, and are not subjected to discrimination.

Ekovar Human Rights Policy This policy was developed based on the Universal Declaration of Human Rights, the United Nations (UN) Global Compact, the UN Convention on the Rights of the Child, International Labor Organization (ILO) Conventions, the OECD Guidelines for Multinational Enterprises, the UN Guiding Principles on Business and Human Rights, and national laws.

This policy defines Ekovar’s responsibilities and principles regarding human rights in its operations and business relationships and applies to all of Ekovar’s activities.

  • ​We respect fundamental human rights as outlined in the UN Universal Declaration of Human Rights and conduct our operations in accordance with these principles.
  • ​We adhere to and implement the principles of non-discrimination, the prohibition of child labor, the prohibition of forced labor, the right to collective bargaining, and freedom of association as set forth in the International Labor Organization’s Declaration on Fundamental Principles and Rights at Work, and we ensure compliance with the requirements of international treaties to which Turkey is a party regarding human rights and social justice.
  • ​ In our operations, we respect and uphold the rights recognized by law.
  • ​ In our operations, we do not engage in any actions that could result in criminal offenses or human rights violations, and we expect our managers and employees to act in the same manner.
  • ​ In processes such as hiring, training, career development, and compensation management, as well as in the workplace, we maintain an equal attitude without discrimination based on gender, ethnic origin, religion, race, nationality, age, physical ability, pregnancy, marital status, sexual orientation, union membership, political views, or similar factors, and we do not tolerate discrimination. We manage these processes transparently based on employees’ qualifications, experience, and performance.
  • ​ We respect the freedom of expression of all our employees within the framework of legal regulations. We do not subject employees who exercise these rights to any form of discrimination or pressure.
  • ​ Our “zero accident” goal forms the foundation of our occupational health and safety (OHS) approach. We prioritize providing a safe work environment for our business partners and employees, take all necessary measures in accordance with OHS regulations, and ensure our employees have the necessary knowledge and training.
  • ​ We commit to providing our employees with a safe work environment free from any form of mistreatment, discrimination, harassment, or bullying. Should such situations arise, we encourage our employees to report them by exercising their right to freedom of expression.
  • ​In our operations, we comply with the working hours and overtime provisions established by laws and regulations.
  • ​ We convey to our employees, through annual training sessions, the rules covering all areas of work as defined by international human rights policies.
  • ​We develop our procurement processes to select suppliers in accordance with this Policy.
  • ​ We identify potential human rights risks arising from our operations and take steps to mitigate them.
  • ​ We identify potential human rights issues arising from our operations and the groups most likely to be affected by these issues.
  • ​If our activities have a negative impact on human rights, we strive to mitigate those impacts.
  • ​ We establish formal and informal complaint mechanisms to address human rights violations committed by the company.

 

WHAT WE EXPECT FROM OUR STAKEHOLDERS

  • ​ Our managers, employees, and anyone acting on behalf of Ekovar must comply with this Policy; they must also report any violations or potential violations to their respective managers and/or through the company’s complaint channels.
  • ​ We also expect our suppliers and business partners to act in accordance with the Policy.

 

  • ​ We encourage our stakeholders to provide feedback regarding the Policy.

 

PRINCIPLES RELATED TO IMPLEMENTATION

This Policy is an integral part of Ekovar’s Sustainability Approach and is communicated to all employees. This Policy has been adopted and put into effect by the Board of Directors.

The Policy is reviewed by the Board of Directors at least once every five years, and progress in its implementation is monitored. If feedback is received from stakeholders, the Board of Directors will review the Policy without waiting for the aforementioned period. In the event of significant service changes, the review process will be conducted without waiting for the aforementioned period.

 

At Ekovar, we are committed to:

  • Considering the environmental impacts of the services we provide across all our activities, as well as their alignment with our organization's purpose and context,
  • Establishing environmental management system goals and objectives, measuring our performance, and taking necessary actions to improve it,
  • Ensuring continuous improvement for a sustainable environment by prioritizing environmental considerations in our operations,
  • Ensuring the efficient use of natural resources and preventing environmental pollution through a strong sense of environmental responsibility,
  • Minimizing waste generation at source in accordance with our compliance obligations and ensuring that relevant waste types are disposed of through licensed facilities,
  • Fully complying with national environmental regulations and monitoring international environmental regulations,
  • Providing regular and comprehensive training to our employees to raise awareness of environmental protection,
  • Taking initiatives to prioritize environmentally friendly and energy-efficient products when selecting energy sources,
  • Prioritizing suppliers that hold environmental certifications and provide environmentally compatible products and services,
  • Fulfilling all applicable compliance obligations across our activities,
  • Continuously improving our Environmental Management System to enhance our environmental performance,
  • Striving to reduce greenhouse gas emissions arising from our operations and developing projects to monitor, control, and reduce these emissions as part of our efforts to combat climate change,
  • Protecting the rights of future generations to the environment and natural resources by adhering to Sustainable Management Policies.

At Ekovar, we are committed to:

  • Working with honest, disciplined, respectful, and ethical professionals who receive continuous training to ensure the delivery of high-quality and healthy services,
  • Establishing quality management system goals and objectives, measuring performance, and taking necessary actions to improve it,
  • Providing high-quality services while ensuring their continuity and reliability,
  • Adding value to society and the environment through a customer-focused service approach built on trust,
  • Continuously increasing the value we add to society and the environment by considering the needs and expectations of all relevant internal and external stakeholders,
  • Meeting our customers' needs and expectations with consistent, high-quality services,
  • Continuously improving our Quality Management System through a traceable approach to our operations.

As part of establishing an Information Security Management System (ISMS) at Ekovar for activities related to the collection, storage, recycling, and disposal of hazardous and non-hazardous waste, we are committed to:

  • Protecting the confidentiality of our customers' information and ensuring compliance with applicable standards and legal regulations,
  • Providing the necessary resources for hardware, software, training, and other controls required to mitigate information security risks and ensuring their continuity,
  • Raising awareness, providing training, and offering incentives to encourage employee participation in and compliance with the Information Security Management System, in line with the need for a holistic approach to information security,
  • Monitoring, reviewing, and maintaining the effectiveness of the Information Security Management System (ISMS) through internal and external audits, ensuring its ongoing compliance and continuous improvement.

 

  • OUR CODE OF ETHICAL CONDUCT AND POLICY

    At Ekovar, the basis of the code of ethical conduct is formed not only by generally accepted ethical values but also by the corporate values that shape the organizational culture.

    RESPECT

    • Since communications with customers, business partners, or suppliers reflect Ekovar, a careful and respectful approach is maintained.
    • Ekovar employees respect their coworkers’ privacy, personal lives, personal preferences, and cultural and religious differences; they may not abuse this information or engage in discrimination for the purpose of favoritism.
    • Managers may not assign work-related tasks to employees outside of work hours.
    • Tolerance is shown toward individuals’ opinions or beliefs regarding religion and personal life.
    • The national and religious values of our employees who are citizens of other countries are respected.
    • Employee records are kept confidential by the relevant departments.
    • The privacy of employees’ activities outside of work is respected.
    • Employees may not engage in conversations or correspondence that cross ethical boundaries among Ekovar employees and/or with customers.
    • Verbal, physical, and/or psychological pressure or harassment for the purpose of psychological abuse (mobbing) is prohibited.

     

    COMPLIANCE WITH LAWS AND REGULATIONS

    • Ekovar is responsible for conducting its business activities in a lawful, professional, and ethical manner, valuing transparency and reliability in its administrative and management practices, and ensuring that all employees comply with applicable laws at all times.
    • Ekovar employees are required to comply with all applicable laws, rules, and regulations while performing their duties.
    • In fulfilling their duties and responsibilities, Ekovar employees must comply with the company's operating principles and all policies, regulations, and announcements published in writing on the intranet and/or communicated via email.

    CONFIDENTIALITY OF INFORMATION

    • As an Ekovar employee, you may have access to a broad range of information concerning Ekovar and its partners, partly by virtue of your position. This information, including salaries and remuneration policies implemented at Ekovar, is hereinafter referred to as "Company Information." You must handle Company Information with the utmost care in all professional and personal interactions, both internally and externally. You are responsible for maintaining the confidentiality of Company Information. Our actions and omissions may harm the interests and reputation of Ekovar and its customers. It is therefore essential to remain aware of this responsibility and act with integrity both within and outside the workplace.
    • Ekovar employees are responsible for maintaining the confidentiality of Company Information and preventing its unauthorized disclosure or distribution. Ekovar has a clean desk policy. Accordingly, Company Information that has not yet been publicly disclosed must not be readily accessible to individuals other than Ekovar employees and/or partners who are authorized to access such information by virtue of their positions.
    • Files, documents, USB drives, CD-ROMs, and all other data storage devices containing confidential or proprietary Company Information must be securely locked away after use, particularly outside working hours.
    • Passwords used to access systems must not be written in locations visible to others, such as desks or computer screens. Employees are expected to configure their computers to require password authentication after a specified period of inactivity. Documents containing confidential information must not be shared over public networks, and waste documents containing confidential information must be securely destroyed. Ekovar employees are responsible for ensuring the security of all documents containing classified or confidential information stored on their computers, portable memory devices, external drives, or other data storage media. Where confidential or important information must be stored on USB drives or external disks, it must be encrypted.
    • Company records or documents must not be accessed, modified, or destroyed without authorization.
    •  

    ACCURATE INFORMATION SHARING AND REPORTING

    • False, misleading, or inaccurate information concerning the company or its employees must not be communicated internally or externally.
    • Any changes in employees' personal, family, marital, or address information, as well as information concerning family members or relatives that is relevant to rights and obligations established under contracts and/or regulations, must be reported to the Human Resources Department together with the relevant supporting documentation.
    • Maintaining, reporting, and presenting timely, complete, and accurate records is essential to Ekovar's reliability as an organization. Therefore, false, incomplete, and/or misleading records, accounting entries, statements, documents, tax returns, and reports are strictly prohibited. Employees are responsible for applying this principle in their daily activities.

    COMMUNICATION WITH THE PRESS AND INFORMATION SHARING ON SOCIAL MEDIA

    • Media relations are an important component of corporate reputation management. If members of the press contact you regarding Ekovar or its activities, you must refer their requests to the spokespersons of your business unit and the Corporate Communications Department without making any statements on behalf of the company.
    • Making statements to media organizations, giving interviews, or participating as a speaker in seminars, conferences, or similar events requires the approval of the company's senior management. No financial gain may be obtained from such activities.
    • Ekovar employees must refrain from sharing content on their personal or corporate social media accounts concerning sensitive matters, such as political or religious issues, that could be associated with the company or perceived as representing its views. Employees must also avoid disclosing confidential information belonging to Ekovar or the organizations and employers with which the company collaborates.

    USE OF EKOVAR RESOURCES

    • Ekovar's assets, facilities, and personnel must not be used for purposes unrelated to the company's interests.
    • Company resources must be used responsibly and economically.
    • Employees must manage their time efficiently and refrain from conducting personal business during working hours.
    • Managers must not assign employees to perform personal tasks.
    • As a general rule, personal visitors should not be received during working hours. Where visits are unavoidable, employees must ensure that meetings are completed within a reasonable period, taking into account the purpose of the visit and without disrupting workflow.
    • Business-related meetings must be held in appropriate meeting rooms.
    • Employees must devote their working time and efforts to the company, must not undertake additional responsibilities, and must not work for another individual or legal entity.
    • Employees may undertake voluntary work for foundations. Such activities are expected to take place outside working hours.
    • Accessing inappropriate websites using company computers or sending harassing text messages, images, or emails through company-provided mobile phones constitutes improper use of company resources and must be avoided.
    • Company assets and belongings belonging to other employees or workplace visitors must not be misused or damaged.

    AVOIDING CONFLICTS OF INTEREST

    • Ekovar employees must not request or accept personal benefits, including gifts, money, checks, property, holidays, or special discounts, from individuals or organizations with which they have business relationships. However, promotional items bearing the corporate logos of business partners, such as notebooks and pens, may be accepted provided that they do not create a negative perception.
    • Business relationships between Ekovar and individuals related to employees up to the third degree of kinship, or financial or other interests held by employees or such relatives in Ekovar's competitors, suppliers, or business partners, may give rise to conflicts of interest.
    • Establishing commercial relationships, entering into lending or borrowing arrangements, or creating other relationships involving personal financial interests with team members, managers, or other employees is considered a conflict of interest. Accordingly, Ekovar does not consider such relationships or conduct among employees appropriate.
    • Employees must not establish personal financial relationships with customers, business partners, or suppliers, nor use business relationships for personal gain.
    • Employees must maintain professional, impartial, and appropriately independent relationships with customers, business partners, and suppliers in accordance with the principles of honesty and transparency.
    • All employees are required to report any observed conflicts of interest to senior management.

    BRIBERY AND CORRUPTION

    • Ekovar strictly prohibits bribery in the conduct of its business activities. Employees are required to comply fully with all applicable anti-corruption laws and regulations. Across all areas in which Ekovar operates, payments or financial and/or in-kind contributions to political parties or politicians intended to facilitate any company-related transaction are prohibited. Ekovar's management supports the implementation of these anti-bribery ethical principles.
    • If you receive a bribe offer from anyone, you must immediately report it to your manager.
    • Ekovar permits the distribution of corporate business gifts prepared by senior management. Employees may consult their managers and senior management regarding such gifts and, where no pre-prepared gifts are available, work together to develop an appropriate gift solution for the specific occasion.
    • These anti-bribery and anti-corruption rules also apply to and are binding upon the company's agents, consultants, distributors, suppliers, and joint venture partners ("Business Partners") acting on behalf of the company anywhere in the world.

    FAIRNESS AND TRUSTWORTHINESS

    • Providing professional and meticulous services throughout all business processes, from initiation to completion, builds confidence in the company's accuracy and reliability. Trust and fairness form the foundation of relationships with employees and all stakeholders.
    • During the recruitment process, consideration is given not only to the essential qualifications required for specific roles but also to competencies such as creativity, reliability, sensitivity, integrity, and teamwork. It is important that the most suitable candidates have the opportunity to apply for open positions regardless of their age, gender, sexual orientation, marital status, disability, skin color, racial or ethnic origin, or nationality. In addition, positive discrimination in favor of women is applied during the recruitment process at Anel.
    • Managers must not discriminate among their subordinates or other colleagues. All employees must be provided with equal opportunities for personal and professional development.
    • No transaction may be carried out without the customer's knowledge, even if it is in the customer's favor. Similarly, employees must not exploit customers' vulnerabilities or seek profit by providing incomplete or inaccurate information, even if doing so would benefit the company.
    • The same principles of fairness and trustworthiness must be observed when selecting business partners and conducting business relationships. When providing services to customers, due diligence must be exercised to ensure that activities are acceptable from a human rights perspective. This also applies to third parties engaged by Anel. If there is any doubt as to whether the activities of a third party are acceptable under the law or Ekovar's Business Ethics Principles, the relevant department manager must be consulted to assess the business relationship. If the party concerned is an existing customer, terminating the business relationship may also be considered with management approval.

    PERSONAL TRANSACTIONS WITH CUSTOMERS AND FAMILY MEMBERS

    Ekovar employees must perform their duties independently of personal dealings or interests involving customers, family members, and/or acquaintances, and must act objectively and without prejudice.

    OCCUPATIONAL HEALTH AND SAFETY

    Ekovar invests in providing a safe and healthy working environment for its employees to reduce the risk of accidents. Employees are encouraged to take responsibility for their own health and safety, as well as the health and safety of others who may be affected by their actions.

     

PURPOSE

This document has been prepared to ensure occupational health and safety by identifying the necessary precautions against hazards arising from workplace activities; to reduce occupational accidents and diseases; to ensure operational safety and production efficiency by minimizing workforce losses; and to eliminate hazardous situations such as machinery failures, explosions, and fires resulting from adverse working conditions.

SCOPE

These instructions cover all employees, visitors, transport personnel, subcontractor personnel, as well as the facilities, projects, assets, and materials belonging to Ekovar Çevre Grup Geri Dönüşüm Atık Depolama İnşaat Taahhüt Sanayi ve Ticaret A.Ş.

These instructions apply to all workplaces operated by Ekovar Çevre Grup Geri Dönüşüm Atık Depolama İnşaat Taahhüt Sanayi ve Ticaret A.Ş. in Ankara and to all projects undertaken by the company.

SECTION 1: GENERAL RULES

Article 1.1: Fully comply with all occupational health and safety measures implemented in the workplace.

Article 1.2: Read and comply with all occupational health and safety rules posted or to be posted on workplace noticeboards and in various areas of the workplace.

Article 1.3: Comply with all written and verbal instructions communicated to you periodically by workplace supervisors and authorized personnel.

Article 1.4: Perform your assigned duties as instructed. Do not interfere with tasks outside your responsibilities. If necessary, communicate your concerns verbally or in writing and follow the instructions of your supervisor.

Article 1.5: Exercise all reasonable care and diligence while performing your duties and make every effort to ensure the safety of your work.

Article 1.6: Use all workplace materials and tools properly and take care to prevent damage.

Article 1.7: Consider the personal safety of your colleagues as important as your own safety.

Article 1.8: Read and strictly follow all warning signs displayed throughout the workplace for various purposes.

Article 1.9: Do not relocate warning signs under any circumstances without notifying the relevant authorized personnel.

Article 1.10: Always use the personal protective equipment (PPE) provided to you for your duties correctly and consistently. If such equipment is damaged, lost, or worn out, inform your supervisor and obtain a replacement. Do not begin work without the protective equipment essential for your personal safety.

Article 1.11: Use the personal protective equipment provided to you in accordance with the relevant instructions and maintain it in good and clean condition.

Article 1.12: Take proper care of your personal protective equipment, including gloves, dust masks, earplugs, and safety glasses, to prevent loss or damage.

Article 1.13: Perform your work in a manner that does not endanger the safety of other employees.

Article 1.14: Do not leave or dispose of sharp, pointed, or otherwise hazardous materials and scrap in an uncontrolled manner.

Article 1.15: Do not lie down or sleep anywhere within the workplace premises.

Article 1.16: Horseplay, practical jokes, and inappropriate joking with colleagues are strictly prohibited in the workplace.

Article 1.17: Do not enter restricted areas or locations marked with "No Entry" signs without authorization. Never cross areas secured with safety barriers or warning tape.

Article 1.18: Do not leave the workplace without permission. Inform your supervisor before leaving.

Article 1.19: Do not allow unauthorized visitors, relatives, acquaintances, or other individuals into production areas.

Article 1.20: Immediately report all workplace accidents, regardless of their severity.

Article 1.21: Do not bring firearms, knives, or similar weapons into the workplace.

Article 1.22: Do not bring alcohol or narcotic substances into the workplace or consume them on the premises. Do not enter the workplace or perform any work while under the influence of alcohol or drugs.

Article 1.23: Provide accurate information regarding your health condition to authorized personnel and undertake duties appropriate to your physical capabilities.

Article 1.24: Report any potentially hazardous conditions observed in the workplace to the responsible personnel or your employee representative.

Article 1.25: Exercise caution on roads used by vehicles and use designated pedestrian walkways.

Article 1.26: Smoking is strictly prohibited in production areas and enclosed spaces. Ensure that cigarettes are completely extinguished.

Article 1.27: When assigned to duties outside the facility, comply with traffic regulations, take all necessary safety precautions, avoid driving while under the influence of alcohol or when fatigued, and ensure that vehicles receive regular maintenance.

Article 1.28: Do not deviate from your designated route.

Article 1.29: Always wear your seat belt when traveling on company shuttle services or operating a vehicle.

Article 1.30: Always hold the handrails when ascending or descending stairs.

Article 1.31: Exercise caution when walking on damaged or wet surfaces. Place appropriate wet-floor warning signs and immediately report surfaces that may cause slipping or tripping to authorized personnel.

Article 1.32: In the event of pregnancy, inform your employer by submitting documentation obtained from a healthcare institution in accordance with the "Regulation on Working Conditions of Pregnant or Nursing Women and Nursing Rooms and Childcare Facilities."

Article 1.33: Report all near-miss incidents to your immediate supervisor or the Occupational Safety Specialist.

SECTION 2: RULES FOR STORAGE AND MATERIAL HANDLING OPERATIONS

Article 2.1: Before lifting materials, squat by bending your knees, position yourself to hold the load securely, keep your back straight, look forward, and lift the material slowly.

Article 2.2: Do not lift or carry materials weighing more than 25 kilograms. Where necessary, use appropriate lifting equipment or team lifting methods.

Article 2.3: Only lift and carry loads appropriate to your physical capabilities and health condition.

Article 2.4: When carrying loads, take precautions against falling or tripping and ensure that the load does not obstruct your field of vision.

Article 2.5: Only use authorized transportation vehicles.

Article 2.6: Do not attempt to catch falling materials.

Article 2.7: Do not ride on forklifts, pallet trucks, or mobile cranes, and do not allow others to do so.

Article 2.8: Segregate and collect waste materials according to their types and ensure their controlled disposal.

Article 2.9: Exercise the necessary caution to prevent materials being transported from striking other personnel and provide verbal warnings when necessary.

Article 2.10: Stack materials appropriately and take the necessary precautions to prevent them from overturning.

Article 2.11: Stack cylindrical materials securely by using wedges or installing stakes to prevent movement.

SECTION 3: RULES FOR WELDING AND CUTTING OPERATIONS

Article 3.1: Welding machines may only be operated by trained, certified, and authorized personnel.

Article 3.2: Do not use cables or electrode holders with damaged insulation. Monitor pressure gauges and do not use them if they are damaged.

Article 3.3: When welding, wear suitable, dry, and undamaged gloves and ensure that all required eye protection, face protection, and other personal protective equipment are used.

Article 3.4: Never place a welding electrode holder under your arm under any circumstances.

Article 3.5: When welding, connect the workpiece to one terminal of the welding machine through the appropriate grounding connection.

Article 3.6: Do not perform welding operations on materials contaminated with flammable substances such as oil or gasoline.

Article 3.7: Do not begin welding operations if flammable or explosive materials, such as oil, gasoline, paper, chemical products, or gas cylinders, are nearby unless these materials have been removed and the necessary safety precautions have been taken.

Article 3.8: Do not smoke while performing welding operations.

Article 3.9: After completing electric welding operations, switch off the welding machine and do not leave the electrode holder unattended.

Article 3.10: Before welding, inspect the work area, gas cylinders, and hoses. Begin work only after confirming that the equipment is suitable for use and does not present hazardous conditions.

Article 3.11: Do not touch the pressure gauges, valves, or torches of gas cylinders with oily hands.

Article 3.12: After completing welding operations, monitor the work area for potential fire hazards and other dangerous conditions.

Article 3.13: After completing cutting operations, do not leave cutting torches unattended and ensure that all valves are closed.

Article 3.14: Do not roll, drop, or use welding gas cylinders in a horizontal position.

Article 3.15: Use specially designed cylinder trolleys when transporting welding gas cylinders. Take the necessary precautions to prevent them from overturning and handle them carefully.

SECTION 4: RULES FOR MACHINERY OPERATIONS

Article 4.1: Do not operate machinery unless you have received the necessary training and are authorized to do so. Always use all required Personal Protective Equipment (PPE) properly when operating machinery.

Article 4.2: Inspect machinery before use (using the Daily Occupational Health and Safety Inspection Form) and, if necessary, warn other employees in the surrounding area.

Article 4.3: In the event of any malfunction or problem with machinery, stop the machine immediately and notify the responsible and authorized personnel.

Article 4.4: Do not use defective tools, equipment, machinery, or workbenches. Attach an "Out of Service" tag to any defective equipment.

Article 4.5: Never interfere with operating machinery using your hands or any other materials under any circumstances.

Article 4.6: Do not perform maintenance or repair work while machinery is in operation.

Article 4.7: Never remove machine guards under any circumstances. Do not disable or bypass safety devices.

Article 4.8: Reinstall all machine guards that have been removed during repair operations.

Article 4.9: Do not make any modifications to machinery without authorization.

Article 4.10: Comply with all operating instructions and warning signs displayed on machinery.

Article 4.11: Do not remove labels or signs from machinery, or damage, break, or disable control buttons.

Article 4.12: Do not use machinery for any purpose other than its intended use.

Article 4.13: Do not leave machinery unattended or in unauthorized locations. Return equipment to its designated storage areas after use.

Article 4.14: When operating machinery with rotating or cutting parts, do not wear loose-fitting or hanging clothing, bracelets, rings, or similar accessories.

 

SECTION 5: RULES CONCERNING PERSONAL PROTECTIVE EQUIPMENT

Article 5.1: Receive the personal protective equipment provided to you, such as safety shoes, overalls, trousers, jackets, earplugs and safety glasses, by signing the Equipment Acknowledgment Form.

Article 5.2: Use the personal protective equipment provided to you continuously and for its intended purpose.

Article 5.3: Take the necessary care to prevent the personal protective equipment provided to you from becoming worn, damaged or lost.

Article 5.4: Always use a welding helmet when performing electric welding.

Article 5.5: Wear safety glasses when using grinding machines, angle grinders, lathes and similar equipment, or when carrying out work in which particles, shavings, paint or other harmful materials may enter your eyes.

Article 5.6: Always use the required mask, work clothing, hearing protection, safety glasses and arm protection when working.

Article 5.7: When working where there is a risk of falling at heights exceeding 2 metres, use a safety harness and attach it to a lifeline.

Article 5.8: Wear safety shoes within production areas.

Article 5.9: If protective equipment is broken, lost, worn or otherwise unusable, inform your supervisor and obtain replacement equipment from the warehouse with authorization. Do not begin work without the protective equipment essential for your personal safety.

SECTION 6: RULES FOR FIXED AND PORTABLE LADDERS

Article 6.1: Ascend and descend ladders one step at a time. Always face the ladder and maintain three points of contact.

Article 6.2: Select a ladder of suitable height for the task. Never place portable ladders on barrels, crates or similar objects.

Article 6.3: Choose a portable ladder that extends 80–90 cm above the platform you intend to access.

Article 6.4: Position and inspect portable ladders so that neither their upper nor lower ends can slip or become dislodged. Ask someone to stabilize the ladder if necessary.

Article 6.5: Do not connect ladders together to extend their length.

Article 6.6: At minimum, visually inspect ladders before use. Do not use defective ladders.

Article 6.7: Do not walk beneath ladders unless absolutely necessary. If you must do so, beware of falling materials and warn other employees using warning signs.

Article 6.8: Do not climb portable ladders with slippery, muddy or similarly contaminated footwear.

Article 6.9: Do not carry materials while climbing ladders without handrails. Raise the materials afterward using a rope-and-pulley system.

Article 6.10: Do not position ladders on operating machinery.

Article 6.11: Do not lean excessively while using a ladder or attempt to move a ladder while standing on it.

SECTION 7: ELECTRICAL SAFETY RULES

Article 7.1: Report electrical faults to electricians or responsible personnel.

Article 7.2: Do not use electrical cables that are torn, melted, burned or broken.

Article 7.3: Do not use electrical cables with damaged insulation; notify responsible personnel or arrange for them to be notified.

Article 7.4: Remember that electrical interventions by unauthorized personnel are dangerous and prohibited.

Article 7.5: Do not place materials around or on electrical panels; access must remain available when intervention is required.

Article 7.6: Do not interfere with electrical panels, including replacing fuses, unless authorized.

Article 7.7: Do not approach or touch power transmission lines, and keep iron pipes and similar materials away from them; there is a risk of death.

Article 7.8: Do not pour, spray or wipe water on or around electrical panels and switchboards.

Article 7.9: Do not remove the insulating material located beneath electrical panels.

Article 7.10: Have electrical cables installed by authorized electricians; do not install electrical lines yourself.

Article 7.11: Keep electrical panel and fuse-box covers closed.

SECTION 8: RULES FOR ELECTRIC HAND TOOLS

Article 8.1: Do not use electrical cables that are torn, melted, burned or broken.

Article 8.2: Do not use hand tools for which you have not received adequate training or information.

Article 8.3: Inspect electric tools before use; do not use them if defective or damaged.

Article 8.4: Do not use tools with defective protective grounding.

Article 8.5: In confined and damp locations, work with low-voltage, 24-volt lighting.

Article 8.6: Do not use hand tools with rotating or moving parts, such as grinders, without their protective guards.

Article 8.7: Do not play practical jokes on anyone using electric hand tools.

Article 8.8: Use personal protective equipment such as gloves, safety glasses and hearing protection when necessary.

Article 8.9: Switch off hand tools when not in use and do not leave them lying around.

Article 8.10: Do not use hand tools with damaged plugs.

Article 8.11: Never insert bare wires or cables without plugs into electrical sockets.

Article 8.12: Disconnect an electrical plug carefully by holding the plug, not by pulling the cable.

Article 8.13: Do not use tools for any purpose other than their intended use.

Article 8.14: Do not leave electric hand tools running unattended.

Article 8.15: Use hand tools only for their intended purposes and avoid overloading them.

SECTION 9: RULES FOR WORKING ON ROOFS

Article 9.1: Before beginning roof work, inspect the work surface for slippery, icy or fragile conditions and begin only after ensuring that it is safe.

Article 9.2: Do not work on roofs if you have a fear of heights, blood-pressure problems, dizziness or similar conditions. Do not access a roof without a medical report confirming that you are fit to work at height.

Article 9.3: Use a roof ladder on roofs made of glass, sheet metal or cement-based panels, or on old, worn or weakened roofs. Do not step directly on such materials.

Article 9.4: Always use a safety harness and safety rope when working on roofs. Connect the harness to the safety rope and securely anchor the rope to a stable and reliable point.

Article 9.5: Do not throw materials, rubbish or other objects from roofs.

Article 9.6: Do not work on roofs in very windy or rainy weather. If such work is unavoidable, perform it under the supervision of a responsible person and only after taking the necessary precautions.

SECTION 10: RULES FOR WORKING AT HEIGHT

Article 10.1: Take all necessary precautions to prevent materials and tools used at height from falling.

Article 10.2: Never throw materials, tools, scrap or even paper from a height.

Article 10.3: When work at height is complete, lower tools and materials safely or position them so that they cannot fall.

Article 10.4: Use a safety harness where there is a risk of falling at heights exceeding 2 metres. Before starting work, learn how and where the harness must be attached.

Article 10.5: Before working at height, such as on scaffolding, inspect the work area. If you identify a hazard, do not begin until the necessary precautions have been taken.

Article 10.6: Do not remove guardrails or toe boards installed as fall-prevention measures. If the work requires their removal, use alternative precautions such as a safety harness.

Article 10.7: When using a safety harness, attach its lanyard to a secure anchor point.

Article 10.8: Do not work at height if you have a fear of heights, blood-pressure problems, dizziness or similar conditions. Remember that you may work at height only if you have a medical report stating that you are fit to do so.

SECTION 11: FIRE SAFETY RULES

Article 11.1: Do not smoke in prohibited areas and ensure that cigarettes are completely extinguished.

Article 11.2: Immediately report, or arrange for the reporting of, even the smallest fire in the workplace.

Article 11.3: Do not burn anything for any reason.

Article 11.4: Do not use blowtorches for heating yourself.

Article 11.5: Do not hang clothing, jackets or similar items over open-flame heaters such as stoves.

Article 11.6: Do not use water on fires involving flammable substances such as oil, gasoline, diesel fuel or paint.

Article 11.7: For fires involving flammable materials such as oil, gasoline, diesel fuel, sawdust or paint, use fire extinguishers containing foam, carbon tetrachloride, carbon dioxide, bicarbonate powder or similarly effective extinguishing agents.

Article 11.8: Never use water on electrical fires.

Article 11.9: For fires involving energized electrical installations or equipment, use carbon dioxide, bicarbonate-powder or similarly effective types of extinguishers.

Article 11.10: Do not relocate fire extinguishers without notifying responsible personnel.

Article 11.11: Do not use fire extinguishers unnecessarily.

Article 11.12: Do not leave materials around fire extinguishers or obstruct fire escape routes or fire stairs.

Article 11.13: Know the escape route, assembly point, firefighting team and your responsibilities in the event of a fire.

Article 11.14: Keep combustible and flammable materials away from heat sources and do not carry out welding or similar work near them.

Article 11.15: Avoid cleaning with gasoline, diesel fuel, alcohol or similar substances unless necessary. If unavoidable, use only the required amount and place used cleaning cloths and rags in designated metal waste bins rather than discarding them carelessly.

Article 11.16: Unplug electric heaters and similar appliances after use.

Article 11.17: In the event of a fire, assemble at the designated emergency assembly point and notify the responsible personnel.

Translation-only safety flag: Article 11.7 retains “carbon tetrachloride” because it appears in the Turkish source. This substance is hazardous and should not be presented as an approved firefighting choice in a current safety procedure. Technical review of the underlying instruction is necessary before use.

SECTION 12: SAFETY AND WARNING SIGNS

Article 13.1: Warning signs are health and safety signs consisting of colors and signboards that indicate a particular purpose, activity or condition.

  • Prohibition Signs: Red signs prohibit behavior that could cause danger or expose a person to danger.
  • Warning Signs: Yellow signs warn of the presence of a hazard.
  • Mandatory Signs: Blue signs indicate actions that must be followed.
  • Emergency Exit and First Aid Signs: Green signs provide information on emergency escape routes, first aid or rescue.

SECTION 13: RULES FOR MAINTENANCE AND REPAIR WORK

Article 13.2: Maintenance and repair work must be carried out only by authorized personnel or companies; do not permit unauthorized interference.

Article 13.3: Before starting maintenance or repair, notify the relevant departments to ensure safety.

Article 13.4: Before starting, consult authorized personnel, such as a foreman or operator, for information about the system and its operation.

Article 13.5: Post the necessary warning signs before maintenance and repair. Isolate the system's energy sources (electricity, gas, compressed air, hydraulic power, etc.), discharge residual energy where necessary, and apply lockout/tagout measures to prevent uncontrolled re-energization.

Article 13.6: Carry out maintenance according to the established schedule and do not exceed maintenance intervals.

Article 13.7: Record significant findings from maintenance and repairs and refer to these records during subsequent inspections.

Article 13.8: Record unusual conditions observed during normal operation of machines and equipment and use these records during major overhaul and maintenance activities.

Article 13.9: Inform operators of changes made during maintenance and repair.

Article 13.10: Provide lighting that allows adequate visibility in the maintenance and repair area.

Article 13.11: After maintenance or repairs, correctly reinstall guards and other auxiliary components.

Article 13.12: As part of preventive maintenance, inspect guards properly and correct defects such as loose screws, worn bearings, defective cables or missing pins before they cause problems.

Article 13.13: Do not repair pressurized boilers or pressure vessels while they remain under pressure.

Article 13.14: Disconnect tanks and storage vessels requiring repair from other tanks and storage vessels.

Article 13.15: Perform maintenance or repairs on tanks or vessels that have contained flammable or explosive materials only after they have been ventilated and cleaned.

Article 13.16: Perform maintenance and repair on electrical and electronic equipment only if you are a qualified technician; otherwise, do not intervene.

Article 13.17: Carry out maintenance and repair of work equipment only when the equipment is switched off.

SECTION 14: HOUSEKEEPING AND CLEANING RULES

Article 14.1: Keep your working area clean and orderly at all times.

Article 14.2: Do not scatter metal pieces, paper scraps, residues, packaging crates, empty cans or boxes, food scraps or similar waste.

Article 14.3: Place waste collected from cleaned areas into waste bins.

Article 14.4: Immediately clean up machine oil spilled on floors.

Article 14.5: Regularly check that stairs are free of oil and water.

Article 14.6: Never allow dry grass, oily sacks, paper, wood pieces, oil accumulations or similar materials around fuel and oil tanks.

Article 14.7: Each department must keep its working area clean.

Article 14.8: Warn crane operators about oil leaks and ensure that suitable corrective action is taken at the leakage points.

Article 14.9: Do not throw cigarette butts on the ground.

Article 14.10: Do not inhale dust generated during cleaning.

SECTION 15: RULES FOR CHANGING ROOMS

Article 15.1: Keep lockers clean and place rubbish in waste bins.

Article 15.2: Do not keep food or beverages in changing-room lockers.

Article 15.3: Use only the locker bearing your name.

Article 15.4: Do not keep dirty clothing in lockers; have it cleaned.

Article 15.5: Wear only your own clothing.

Article 15.6: Do not use clothing contaminated with chemicals or with worn protective sections; replace it with new clothing.

SECTION 16: RULES CONCERNING TRAINING

Article 16.1: Employees in production and other units/departments must attend training sessions. Attendance is mandatory under Occupational Health and Safety Law No. 6331. Training shall cover at least the following topics:

TRAINING TOPICS

  1. General topics
  • a) Information on labor legislation.
  • b) Employees' legal rights and responsibilities.
  • c) Workplace cleanliness and order.
  • ç) Legal consequences of occupational accidents and occupational diseases.
  1. Health topics
  • a) Causes of occupational diseases.
  • b) Principles of disease prevention and application of protective techniques.
  • c) Biological and psychosocial risk factors.
  • ç) First aid.
  • d) Harmful effects of tobacco products and secondhand exposure.
  1. Technical topics
  • a) Chemical, physical and ergonomic risk factors.
  • b) Manual lifting and carrying.
  • c) Ignition, explosion, fire and fire prevention.
  • ç) Safe use of work equipment.
  • d) Working with display-screen equipment.
  • e) Electrical hazards, risks and precautions.
  • f) Causes of occupational accidents and the application of prevention principles and techniques.
  • g) Safety and health signs.
  • ğ) Use of personal protective equipment.
  • h) General occupational health and safety rules and safety culture.
  • ı) Evacuation and rescue.
  1. Other topics: Job-specific topics such as working at height, working in confined spaces, working in areas with radiation hazards, welding, working with equipment involving special risks, potential health risks caused by carcinogenic substances, and similar topics.

SECTION 17: PRECAUTIONS AGAINST HAZARDS IN THE CANTEEN AND TEA PREPARATION AREA

Article 17.1: Do not enter behind the serving counter or into the kitchen unless you are assigned to kitchen duties.

Article 17.2: Mop the canteen floor frequently to eliminate slippery conditions.

Article 17.3: Do not run or engage in horseplay in the canteen.

Article 17.4: Ensure that forks, spoons, knives, glasses and similar utensils are thoroughly cleaned in the dishwashing area; do not serve items that have not been properly cleaned.

Article 17.5: Canteen personnel must wear hair caps and white aprons when serving food.

Article 17.6: Wear a waterproof apron when washing dishes.

Article 17.7: Exercise caution when peeling, chopping and performing other knife tasks requiring manual dexterity; ensure that knife handles are not cracked.

Article 17.8: Keep fire extinguishers in the canteen in readily accessible locations and assist responsible personnel in responding promptly to possible fires.

Article 17.9: Keep canteen sinks clean and avoid wasteful use of products.

SECTION 18: RULES FOR OFFICE WORK

Article 18.1: Slipping, Tripping and Falling Hazards

  • Do not leave power cords or other cables across walkways. Never trap them beneath objects or between furniture.
  • Keep power cords and other cables away from passageways.
  • Do not store materials on stairs or in walking areas.
  • Keep corridors and other exit routes free of flammable materials and obstructions.
  • Choose footwear appropriate to your working environment. Check the length of shoelaces, since decorative features and loose laces may catch on your other foot and cause a fall.

Article 18.2: Filing Cabinets and Storage Shelves

  • Position cabinets securely and take precautions against tipping.
  • Check the floor and ensure all cabinet feet make stable contact with it.
  • Position objects on upper cabinets or shelves securely. Store heavier materials on lower shelves and lighter materials on upper shelves.
  • Close drawers and cabinet doors after use; filing cabinets can easily tip if multiple drawers are left open.
  • Never leave filing drawers or cabinet doors open and unattended, as this may cause trips, falls, collisions and serious injuries.

Article 18.3: Climbing, Reaching and Lifting Hazards

  • Falling from a chair can cause permanent disability or death. Sit properly and never climb onto chairs.
  • Boxes and other improvised arrangements are also extremely dangerous. Use suitable equipment, such as a ladder or step stool, rather than taking risks.
  • If you frequently need to reach objects, obtain a suitable small stepladder or step stool.
  • Sprains and other musculoskeletal injuries are office hazards, and improper lifting is a common problem. Overreaching for objects strains the arms and back; remember to apply basic safe lifting techniques.

Article 18.4: Basic Safe Lifting Principles

  • Assess the object before lifting it to ensure that you can lift it.
  • Face the object and move as close to it as possible.
  • Stand with stable footing, one foot slightly ahead of the other.
  • Bend your knees and squat.
  • Keep your back straight at this stage.
  • Grip the object firmly.
  • Breathe in, hold your breath and tighten your abdominal muscles.
  • Keep your back straight and stand up smoothly.
  • Hold the object as close to your body as possible.

To lower the object, reverse the procedure. Never twist your body or carry heavy objects above your body while holding them. Move objects on the floor by pushing rather than pulling, but do not push them with your feet, as doing so may injure your lower back. Protect your back.

Always: Maintain proper sitting and standing posture and the natural curve of your back. Perform exercises to strengthen your abdominal and back muscles; daily exercise and stretching may help prevent muscle injuries. Remember that weight carried around the waist adds to the load on your back.

Article 18.5: Office Equipment (Computers, Printers and Other Electrical or Non-Electrical Office Equipment)

  • Office equipment may cause cuts, burns or electric shocks if it is not properly protected and maintained.
  • Follow the manufacturer's instructions for using and routinely maintaining equipment.

SECTION 19: RULES FOR WORKING WITH DISPLAY-SCREEN EQUIPMENT

Article 19.1: Poorly designed workstations or work environments can cause health problems and reduce concentration and productivity. Set aside time for rest.

Article 19.2: Even if your workstation is comfortable, sitting for long periods can be tiring and stressful. We recommend taking occasional short walks for a break.

Article 19.3: Prolonged reading or viewing of computer screens, glare and similar factors may cause eye strain, reduced concentration, headaches and excessive fatigue. Take breaks, perform eye-relaxation exercises and vary your work activities.

Article 19.4: As a general rule, varying physical movement reduces stress and repetitive-motion injuries. Repeat ergonomic exercises.

Article 19.5: Keep air-conditioning units set between 20°C and 25°C. Excessively hot or cold conditions can cause various illnesses.

SECTION 20: RULES FOR SAFE EVACUATION

Article 20.1: In any emergency, including fires, earthquakes or major workplace accidents, proceed to the emergency assembly point.

Article 20.2: Reach the emergency assembly point quickly using emergency exit doors and routes.

Article 20.3: Act in accordance with what you learned from previous emergency evacuation drills.

Article 20.4: Avoid actions that could cause you or your colleagues to panic.

Article 20.5: Follow warnings, alarms and verbal instructions during facility evacuation.

Article 20.6: Remain calm.

SECTION 21: RULES CONCERNING CHEMICAL SUBSTANCES

Article 21.1: All chemical substances are harmful. Their harmful effects may result from ingestion, inhalation or skin contact. Therefore, as a general principle, do not ingest, inhale or allow these substances to contact your skin.

Article 21.2: Remember that the most important rules for protection against the chemicals you work with are personal hygiene and the use of personal protective equipment.

Article 21.3: After work, wash your hands and face thoroughly with plenty of soapy water. Do not enter the canteen if your clothing or body is contaminated with chemicals; clean yourself thoroughly where possible and change your clothes if necessary.

Article 21.4: Wear an apron over your work clothing to protect it from chemical contamination. Remove these aprons before entering the canteen.

Article 21.5: Prevent chemical contact with your skin by wearing rubber work gloves, work clothing and safety shoes.

Article 21.6: After removing your gloves, wash them with plenty of soapy water.

Article 21.7: If chemicals, particularly liquid chemicals, spill or splash onto your skin, wash the affected area with plenty of soapy water.

Article 21.8: Do not enter the canteen while wearing gloves.

Article 21.9: Maintaining a clean environment is also the first requirement for preventing chemicals from contacting your skin. Clean spills immediately in accordance with the instructions provided on the chemical product.

Article 21.10: If chemicals enter your eyes, follow the instructions in the chemical's Material Safety Data Sheet (MSDS). Notify your supervisor and seek medical attention.

Article 21.11: Wear suitable safety glasses for the work performed to prevent chemicals from entering your eyes.

Article 21.12: When working in dusty conditions, wear the cap provided with your work clothing to protect your hair.

Article 21.13: Wear a dust mask when working in dusty environments to protect your respiratory system.

Article 21.14: Do not leave dust masks lying around when not in use. They may become contaminated without your knowledge, causing you to inhale dust particles when you wear them again.

SECTION 22: RULES FOR WORKING AROUND EQUIPMENT AND DEVICES

Article 22.1: For the safety of colleagues and the entire facility, never leave your workstation or machine without arranging for someone to take over and informing your supervisor.

Article 22.2: Do not enter enclosed spaces such as furnaces, boilers or tanks without an entry and work permit.

Article 22.3: Do not perform electrical work or intervene in moving parts without authorization. Inform the maintenance supervisor and have the work performed by maintenance personnel.

Article 22.4: Before starting work in hazardous locations, identify the most suitable escape route for emergencies.

Article 22.5: Machines have safety devices, including safety valves, automatic shut-offs and fuses, for use in malfunctions. Do not modify, obstruct or repair such devices unless authorized and instructed. Report all problems involving safety devices to your supervisor.

Article 22.6: Operate only the machinery for which you are responsible. Do not operate pumps, compressors, fans, drive motors or other mechanical equipment if you are unauthorized or unfamiliar with the facility systems.

Article 22.7: Do not wipe, oil, clean or adjust mechanical equipment while it is running. Do not use cloths around operating machinery.

Article 22.8: Do not intervene in a machine when a component, mold or similar item becomes jammed without first stopping the machine.

Article 22.9: When operating or repairing motor-driven machinery, it is essential to disconnect the power supply by turning off the switch.

Article 22.10: Never touch electrical equipment with damp, sweaty or wet hands.

Article 22.11: Keep all machine guards in their proper positions and fit for purpose. Do not operate machinery until guards removed during maintenance and repairs have been reinstalled.

Article 22.12: Inspect machine electrical installations and the cables of portable electric tools at regular intervals, and allow only the maintenance supervisor to correct identified defects.

Article 22.13: Employees working on energized electrical lines must wear gloves suitable for the operating voltage. Store the gloves properly and inspect them before use; do not begin work if any defect is found.

Article 22.14: Non-conductive rubber mats have been placed in front of the main electrical panel and other panels for safety. Do not remove them or allow them to be removed.

Article 22.15: The spaces beside and behind the main electrical panel and other panels must not be used to store materials or other objects. Exercise care and warn colleagues accordingly.

Article 22.16: Never use water to extinguish fires involving or occurring around electrically operated machinery, equipment or motors. Use CO₂-based extinguishers for such fires.

Article 22.17: Do not replace light bulbs specially designed for vapor- or gas-hazard environments without first disconnecting the electrical supply.

Article 22.18: Operate manual switches smoothly and, where possible, with one hand. Rapid or careless operation may create sparks and cause a fire.

Article 22.19: Keep pump surroundings clean. Repair leaks at flanges, gaskets and similar points promptly when identified. Do not perform repairs while pumps are running or place your hands in moving parts.

Article 22.20: If you make a mistake during maintenance or repair, never attempt to conceal it, regardless of the cause. Tell your supervisor, as concealing it may lead to more serious consequences.

SECTION 23: RULES CONCERNING ENVIRONMENTAL CLEANLINESS

Article 23.1: Keep the factory's internal and external roads, open areas and green spaces clean and well maintained at all times.

Article 23.2: Do not burn paper or rubbish in waste drums. Do not empty full waste drums indiscriminately; empty them into the waste collection area 15 minutes before the end of each shift.

Article 23.3: Place only the material identified on the label into each waste drum.

Article 23.4: Use tools and equipment for green-area maintenance and cleaning carefully and keep them clean. After work, store them in an enclosed area.

Article 23.5: Clean changing rooms, toilets and showers regularly throughout the day.

Article 23.6: Report defective faucets, shower fittings and valves to the maintenance supervisor.

Article 23.7: Keep showers and toilets clean and in working order at all times.

Article 23.8: Do not place objects on, under or beside lockers. Keep your belongings inside your locker.

Article 23.9: Remember that distraction, negligence and indecisive actions may cost you or your colleagues your lives.

Article 23.10: Do not engage in behavior that threatens colleagues' health. Physical practical jokes are dangerous in all settings and must be avoided.

Article 23.11: Carefully follow workplace advice and the warnings displayed on posters and signs. These are posted for your benefit; read and obey them.

Article 23.12: Never underestimate an injury. Seek first aid immediately for every injury. Cuts, bruises, scratches, burns and puncture wounds, however minor, must receive prompt treatment. Infection from even a small scratch may cause unexpected consequences.

Article 23.13: Smoking while working poses serious health and safety risks. Therefore, do not smoke in work areas or other enclosed spaces.

SECTION 24: RULES FOR CRANE OPERATION

Article 24.1: Do not attempt to operate a crane unless you hold a crane operator's certificate.

Article 24.2: Visually inspect the rails and operating area of an overhead crane for obstructions; begin operation only after confirming suitability.

Article 24.3: Test the emergency stop and all directional controls before each use.

Article 24.4: If any slipping or binding is observed in the crane, stop work and notify the maintenance and repair department. Do not continue operating it under any circumstances.

Article 24.5: Never exceed the crane's rated load capacity or lift loads of unknown weight.

Article 24.6: Position the hoist trolley centrally over the load.

Article 24.7: When transporting materials by crane, keep the load at an appropriate height where possible and avoid passing it over machinery.

Article 24.8: When lifting materials with overhead cranes, use slings that have been tested and declared fit for use.

Article 24.9: Conduct the daily inspection before starting work and record the findings on the form.

Article 24.10: Ensure no one is near the crane or beneath a suspended load. Never stand under a load or leave it suspended unattended.

Article 24.11: Do not pass unprotected loads over working areas or employees.

Article 24.12: Obey any STOP warning, regardless of who gives it.

Article 24.13: Do not lift unsafe or improperly secured loads, and do not attempt to transport gas cylinders without a cylinder basket.

Article 24.14: Do not engage in any other task while a load is suspended from the crane.

Article 24.15: Inspect wire ropes, shackles, slings and hooks before and after operations and use suitable wire-rope or fabric slings.

Article 24.16: Clear the crane's travel path and ensure that no people or obstructions are present during operations.

Article 24.17: Immediately report loosened or opened strands in wire ropes or slings and remove the affected equipment from service before it is used again.

Article 24.18: Select lifting points according to the component's weight, using as many suitable points as possible to distribute the load evenly.

Article 24.19: Lift loads horizontally. Otherwise, maneuvers must be performed under the supervision of a responsible signaler and the surrounding area must be cleared to protect against load swinging and unstable load conditions.

Article 24.20: When turning a component, use two ropes attached to opposite edges, and prevent anyone from entering the area during turning.

Article 24.21: Never use a crane for pulling or dragging operations.

Article 24.22: When lifting materials in open-top containers such as bins or baskets, do not overload them or stack materials above the height of their sides.

  • Compliance with the Signaler (Rigger): When several people are involved in lifting operations, the crane operator shall receive signals from only one designated individual among the load binder, slinger or other personnel. The signaler must remain clearly visible to the operator.
  • Travel Without a Load: When lifting equipment is moved without a load, stackers or slingers must properly attach the lifting ropes or slings to the hooks before signaling movement, and operators must maintain the hooks at a sufficient height.

Article 24.1 [numbering repeated in source]: After crane operations, park the crane safely.

Article 24.2 [numbering repeated in source]: If oil leaks occur in the crane's helical gear or drum, notify the maintenance and repair team and arrange for appropriate intervention using suitable equipment.

Article 24.3 [numbering repeated in source]: When moving a load in one direction, do not initiate movement in another direction before the previous movement has completely stopped.

Article 24.4 [numbering repeated in source]: Monitor the load during transport and never pass underneath it.

Article 24.5 [numbering repeated in source]: Use the emergency stop button in emergencies; check it before each use and ensure it functions correctly.

SECTION 25: RULES FOR FORKLIFT OPERATION

Article 25.1: Remember that forklifts may be operated only by personnel holding the appropriate operator's license.

Article 25.2: Inspect the forklift before each use. Immediately report visible defects and required repairs to the responsible authorities.

Article 25.3: Do not operate forklifts in unsafe areas or areas displaying prohibition or warning signs. Always follow forklift operating rules and safety precautions and observe all warning signs.

Article 25.4: Never attempt to operate a forklift without being seated in the operator's seat. Keep your arms, legs and head inside the operator's compartment, and keep your hands and feet away from the lifting mast.

Article 25.5: Never operate forklifts with wet hands or shoes or handle control levers with oily hands. Your hands or feet may slip, causing loss of control and an accident.

Article 25.6: Avoid sudden maneuvers at high speeds and do not accelerate or brake abruptly. Sudden, unstable movement may cause the forklift to overturn.

Article 25.7: Sound the horn and reduce speed when turning, entering or leaving buildings, and operating near people.

Article 25.8: Never carry or lift people on forklift forks or allow others to ride on the sides of a forklift. Remember that forklifts are designed only to carry loads.

Article 25.9: Never operate a forklift without its operator overhead guard and load backrest.

Article 25.10: Transport loads with the mast tilted backward.

Article 25.11: Never overload the forklift; always remain within its recommended rated capacity.

Article 25.12: Never add counterweights to a forklift. Overloading may cause the forklift to overturn, injuring personnel and damaging the vehicle.

Article 25.13: Do not move the forklift if the load extends higher than the load backrest.

Article 25.14: Carry loads with the forks lowered as far as possible and the mast tilted backward. This improves forklift stability and visibility.

Article 25.15: Never raise a loaded forklift's forks with the mast tilted forward or tilt the mast forward while the load is elevated. Doing so may cause the forklift to tip forward.

Article 25.16: If the forklift begins to overturn, do not attempt to jump out. Remain seated and hold on firmly to protect your life.

Article 25.17: Always drive forward when ascending ramps and in reverse when descending them. Do not lift loads or maneuver on slopes.

Article 25.18: Use an assistant for guidance when traveling up or down ramps, particularly with large loads. Do not load or unload on slopes. Do not turn or drive across a slope.

Article 25.19: Avoid operating forklifts on uneven terrain. If unavoidable, proceed slowly and carefully.

Article 25.20: Do not drive over loose objects. Keep your eyes on the direction of travel and watch for people and obstacles in your path. Forklift operators must remain attentive at all times.

Article 25.21: Do not drive forward if the load restricts your view. Except when ascending a slope, driving in reverse may improve visibility in such situations.

  • Exercise extreme caution when operating a forklift near loading-ramp edges. Maintain a safe distance from platform and ramp edges. Even minor carelessness may cause accidents, injuries or fatalities.

Article 25.22: Do not lift or transport unstable or unsafe loads. Balance the load according to its center of gravity, adjust fork spacing accordingly and ensure that loads are stacked properly.

Article 25.23: Always use an appropriately sized pallet. Space forks as widely as possible beneath the load and distribute its weight evenly between them.

  • Never transport loads using only one fork.

Article 25.24: Do not operate forklifts on soft or unstable ground. Follow all signs and do not exceed the specified maximum floor-load limits, elevator capacities or ceiling clearances.

Article 25.25: Do not operate forklifts on slippery surfaces. Sand, gravel, ice and mud may cause overturning accidents. If operation is unavoidable, drive slowly.

Article 25.26: Do not allow anyone to stand or pass beneath the forklift load or lifting mechanism.

  • The load could fall and cause injury or death.

Article 25.27: When multiple forklifts are operating in the same area, maintain adequate separation and ensure sufficient stopping distance.

Never attempt to catch up with or overtake other forklifts.

Article 25.28: Never use a forklift to push or strike another forklift. If your forklift is not functioning, notify the service department immediately.

Article 25.29: Excessive stacking or raising a load obstructs visibility. Do not travel with the load elevated or the mast raised.

  • The forklift may overturn, causing damage, injury or death.

Article 25.30: Park forklifts only in designated parking areas. When parked, lower the forks completely, apply the parking brake, place chocks in front of and behind the wheels, and stop the engine.

Article 25.31: Stop the engine whenever the forklift is not in use and perform the necessary daily maintenance checks at the end of the workday.

SECTION 26: SAFETY IN THE USE OF CUTTING AND PIERCING HAND TOOLS

Article 26.1: Check the condition of hand tools before every use and use them only if you are satisfied that they are safe.

Article 26.2: Ensure that hand tools are made of suitable materials. Hand-tool accidents arise from the improper use of tools made of unsuitable materials or tools that are excessively worn.

Article 26.3: Exercise care both during and after the use of hand tools.

Article 26.4: Do not use pliers, adjustable wrenches, pincers or similar hand tools on surfaces where they may slip and be thrown.

Article 26.5: Do not use impact tools such as chisels, wedges or demolition bits until their heads become mushroom-shaped.

Article 26.6: Ensure wooden handles are free from splinters and cracks and are firmly attached to the tool.

Article 26.7: Use non-sparking tools made of brass, aluminum, plastic or wood near flammable substances.

Article 26.8: Immediately notify the foreman if a hazardous condition arises during work.

Article 26.9: Keep areas around hazardous tools and locations where hand tools are used clean and dry to prevent slips and trips.

Article 26.10: Remember that knives and scissors used for work must be sharp.

Article 26.11: Remember that you are responsible for using appropriate tools and carrying out their daily maintenance.

REMEMBER!

  • Do not take additional risks simply to prevent work interruptions or speed up production. Such risks endanger your safety, your colleagues and the workplace.
  • Do not seek temporary fixes for seemingly minor problems. Temporary solutions may only address the immediate situation, whereas planned and engineered solutions are more useful in the long term. Report problems to your supervisors.
  • Do not react impulsively to a problem with an operating machine. Stop the machine, ensure your own safety first and then secure the material and surrounding area; notify authorized personnel.
  • Do not leave equipment in unsafe or hazardous positions. At the end of work, switch off all equipment using its power control and do not leave it lying around plugged in. Leave the workplace as you would wish to find it.
  • Do not use equipment or vehicles with defective warning or safety systems. Notify authorized personnel so defective components can be repaired, and warn colleagues who use such equipment or vehicles.
  • Never overload cranes, forklifts, trucks or other transport vehicles, or load them unevenly. Do not allow loads to protrude, overhang or be positioned so that they may fall due to movement during travel. Excessive or unbalanced loading may cause serious loss of life and property.
  • Visually inspect all powered and non-powered hand tools before use. Report identified defects to authorized personnel and do not use the tools until the defects are corrected.
  • Do not join an ongoing operation without first learning what is being done, how it is being done and who is involved. Even a well-intentioned action may injure someone or cause product loss.
  • Always follow lockout and tagging rules during maintenance and repair. Never intervene in machinery for any purpose without first controlling stored or static energy.
  • Exercise extreme caution when working at height. Always use all necessary protective equipment, such as safety harnesses, hard hats and safety glasses, and avoid actions that could endanger yourself or others.
  • Always arrive at work well rested. If you are tired or exhausted, inform your supervisor. Resting for an hour or two is safer than endangering yourself, other employees or the workplace.
  • Continue to use required personal protective equipment, including hard hats, safety glasses, safety shoes, high-visibility vests and task-appropriate gloves, even after finishing your own task. Work performed by colleagues may still expose you to hazards.

EMPLOYEES' DUTIES, AUTHORITIES AND RESPONSIBILITIES

All internal and external personnel working for Ekovar Çevre Grup Geri Dönüşüm Atık Depolama İnşaat Taahhüt Sanayi ve Ticaret A.Ş. have duties, authority and responsibilities in implementing occupational health and safety at this workplace.

  • Employees shall fulfill these duties, authorities and responsibilities within the framework of published job descriptions, procedures and instructions.
  • Using the personal protective equipment provided to protect employees' health and safety is a legal obligation for employees.
  • Employees must report faulty machines, devices and equipment used in their work to their supervisors.
  • Employees must never work with faulty machines, devices or equipment.

Under Occupational Health and Safety Law No. 6331:

Employees must not endanger their own health and safety or that of other employees affected by their actions or work, in accordance with the occupational health and safety training they have received and the employer's instructions.

(2) Employees' obligations, in accordance with the training and instructions provided by the employer, are as follows:

  • a) Use workplace machines, devices, vehicles, tools, hazardous substances, transport equipment and other production equipment in accordance with the rules; use their safety devices correctly and do not arbitrarily remove or modify them.
  • b) Use and protect the personal protective equipment provided to them correctly.
  • c) Immediately inform the employer or employee representative if they encounter a serious and imminent health or safety hazard in workplace machines, devices, vehicles, tools, facilities or buildings, or identify a deficiency in protective measures.
  • ç) Cooperate with the employer and employee representative in remedying deficiencies and regulatory non-compliance identified by the authority empowered to inspect the workplace.
  • d) Cooperate with the employer and employee representative to ensure occupational health and safety within their own area of responsibility.

ATTENTION!

If these provisions are not followed, workplace management will issue warnings and monetary penalties to personnel, responsible persons and subcontractors who fail to comply with the rules.

Furthermore, where necessary, the employer may unilaterally terminate an employee's employment contract without compensation pursuant to Article 25, paragraph II, of Labor Law No. 4857.

Article 25 of Labor Law No. 4857

II — Circumstances Contrary to Rules of Morality and Good Faith, and Similar Cases:

  1. a) The employee misleads the employer when entering into the employment contract by claiming to possess qualifications or conditions essential to a fundamental element of the contract that the employee does not actually possess, or by providing untrue information or statements.
  2. b) The employee makes statements or engages in conduct that violates the honor or dignity of the employer or a member of the employer's family, or makes false and defamatory allegations or accusations against the employer.
  3. c) The employee sexually harasses another employee of the employer.
  4. d) The employee assaults or harasses the employer, a member of the employer's family or another employee, comes to work intoxicated or under the influence of drugs, or uses such substances in the workplace.
  5. e) The employee engages in conduct inconsistent with honesty and loyalty, such as abusing the employer's trust, committing theft or disclosing the employer's trade secrets.
  6. f) The employee commits a criminal offense at the workplace that is punishable by imprisonment for more than seven days, where the sentence is not suspended.
  7. g) The employee, without the employer's permission or a justifiable reason, fails to attend work for two consecutive working days, twice in one month on a working day following a holiday, or for three working days in one month.
  8. h) The employee persists in refusing to perform duties they are obliged to carry out despite having been reminded of those duties.

ı) The employee, through intentional conduct or negligence, endangers workplace safety or damages or causes the loss of machinery, installations, or other property or materials belonging to the employer or entrusted to the employee, to an extent that cannot be compensated by the amount of the employee's thirty-day wage.